Tinted cars are wonderful. It protects you from glare, and they provide style and privacy. The unfortunate thing is that the tint does not last forever and if you fail to remove it properly, you will end up with a lot of mess. There are two main ways that car window tinting shops use: scraping and heating. Depending on why you want to remove the tint film from your car window, the best method is different. You would also have to clean the glass after that because these methods do not completely remove all the adhesives.

Removing the car window tint can turn into a bad experience. If you are tired and just decide to just peel it off, you will not like it.

Here are tips you can follow:

Steamer

This method needs a little upfront investment of $20 to $30 because that is the cost of a steamer.

Remember that home garment steamers are useful when it comes to just garment steaming, so you should consider the money is spent well in case you decide on this method.

Once you have a garment steamer, there are steps you need to follow carefully so you can easily and safely remove your car window’s tint without any damage.

You also have to buy a pair of heat-resistant gloves and standard disposable razor blade packs.

Heat Gun or Hair Dryer

This is a simple way to remove tint decals and it works equally well using a heat gun, but it can get quite messy. You would want to choose a corner to begin the process.

• You must hold the hairdryer two inches away from the window and run it on a high setting until the glue will melt enough to pry up the edge using your fingernail.
• Make sure to angle the dryer so that it hits where the film and window will meet, which slowly peels while the glue softens.
• When you use a clean towel, run the adhesive away, and use your hairdryer to soften if needed.

Ammonia and Solar Heat Method

This approach is only necessary if you are living in a region where there is a sunshine surplus throughout the entire year because this method mainly depends on sunlight. It is to be used for removing interior tint film, like what the majority of installers place on a windshield, but it also works great with other windows.

The supplies you require are regular ammonia in a spray bottle, black plastic garbage bags, soapy water, razor blade tape or scissors, and a sunny day.

Solar Peel

You are allowed to take advantage of a sunny and warm day in order to make your job simpler. You would have to use two black plastic garbage bags in order to cut the shape of your window, a spray bottle with soapy water, a tarp, and spray bottle with ammonia inside.

Use Alcohol

Among the cheapest and most effective solvents out there, one bottle of 90% isopropyl alcohol makes it a quick work of leftover glue.

You can put some on your rag in order to get rid of smaller pots and one spray bottle and a rag for larger surfaces. Make sure to use this method in an area that is well-ventilated and avoid breathing in the fumes while you work.

Scrubbing

Over a warm day or heated garbage, you can use hot and soapy water and a car ice scraper to remove all the glue residue. This is a safe method, and it is also a great excuse to clean your car’s interior.

Contact the auto tint shop Springfield VA to replace your tint after removal.